Q: What is Timberflex Interior?

A: Timberflex Interior is a film forming clear satin wood finish designed for interior wood walls, ceilings and trim. On bare wood, it requires at least two coats for proper appearance. Allow at least 4-8 hours between coats in good drying conditions.

Q: How long will it last and do I need to maintain it?

A: Timberflex Interior can last for years, all that's required is periodic dusting and if the film is damaged it can be touched up very easily.

Q: What is the best way to apply Timberflex Interior?

A: Timberflex can be brushed, rolled or sprayed.

Q: Can Timberflex be applied over another stain?

A: Yes, provided that the stain is fully cured, the surface is sound and clean and the stain doesn't have any waxes, silicones or other additives that would cause adhesion problems.

Q: How long should I wait between coats?

A: Under good conditions (warm temperatures, low humidity) you should wait at least four hours between coats. Cooler conditions or a lack of air movement will require longer dry times. Application of top coats before the previous coat is dry can cause the product to wrinkle and result in poor appearance.

Q: What can I use for clean-up?

A: Timberflex Interior is a solvent borne product and you can use Lacquer Thinner or Mineral Spirits (paint thinner) for clean up.

Q: Are there any special preparation requirements?

A: Prior to using Timberflex Interior, make sure wood is clean, dry and free from mold and mildew.